Boiling Dryers That Can Be Used in Rubber and Plastic Additives, Pesticides, Pigments and Chemicals

• Customization: Available
• After-sales Service: Respond Within 24 Hours
• Warranty: Respond Within 24 Hours
• Model NO.: GFG-1
• Movement Way: Agitation
• Flow: Cross Flow
• Heating Mode: Convective
• Material Status: Powder, Solution, Strap
• Drying Medium: Superheated Steam, Air
• Operational Method: Continuous
• Type: Double Cone Rotating
• Velocity: The Drying Speed Is Fast.
• Mass: High Uniformity
• Natural Capacity: Good Fluidity, Good Solubility, High Purity
• Operate: Easy to Operate and Easy to Control
• Transport Package: Naked Clothes
• Specification: 400*250*170cm
• Trademark: AIBUNA CHANGZHOU
• Origin: China
• Package Size: 320.00cm * 620.00cm * 75.00cm
• Package Gross Weight: 300.000kg

Product Description

Product Description

P r i n c i p l e

Purified and heated air is introduced from the bottom through suction fan and passed through the screen plate of raw material.In the work chamber,the state of fluidization is formed through stirring and negative pressure.The moisture is evaporatedand removed rapidly and the raw material is dried quickly.

 

Please enter the title here

F  e  a  t  u  r  e  s

A. The structure of fluidization bed is of round so as to avoid dead corner.

B. Inside the hopper there is a stir in order to avoid agglomeration of raw material and forming canal of flow.

C. The granule is discharged through the method of turning over.It is   very   convenient    and   full.The   discharged   system   can    be designed as request too.

D. It is operated at he conditions of negative pressure and seal.The air is filtered.Therefore it is simple in operation and convenient for cleaning.It  is  an  ideal  equipment  that   is  in  conformity  with  the requirements of GMP.

E. The drying speed is fast and the temperature is uniform.In general the drying time is 20~30 minutes.

D e s c r i p t i o n s

Boiling dryer is also called asfluidized-bed.It consists ofairfiter,heater,fluidized-bed main machine,feeder,cyclone separator,cloth bag duster,high-pressure centrifuge fan and operation table.Because the properties of raw materials exist difference,when equip the dust removing equipment,it should consider the practical need.It can select cyclone separator and cloth bag duster at the same time or one of them.In general speaking,it needs to select

cyclone separator only for raw material that is large in specific gravity and cloth bag duster for powder and small granule raw materials that is light in specificgravity.Meanwhile there is air feeding device and belt conveyor for selection.

Separated granule solid raw material is fed into fluidized-bed drier through feeder.Fresh air through filtering and heating is sent to the bottom  of fluidizedbed by fan and contacts with solid raw material on distributing plate.In this way thefluidized state is formed and the heat exchange between air and solid is carried out.The dried raw material is discharged from outlet and wasted gas is exhausted from the top of fluidized- bed  where  catches  solid  powder  through  cyclone  separator,cloth  bag  duster.

Steam,electricity or hot air furnace can be used (it can be  supplied as request)It is  suitable  for drying  separated granule  such  as,raw material  of pharmaceutical industry,tablet,tablet of drink of Chinese traditional medicines;plastic resin,citric acid,other powder and granule of chemical industry,powder of drink,corn embryo feed of foodstuff industry and so on.The Max diameter of raw material to be dried will 6 mm and the best diameter will be 0.5 or 3mm.

APPLICATIONS

A p p l i c a t i o n s

AUse screw to extrude and vibrate granule and granulate granule using the methods of humidity,high speed and mixing;

B. Suitable for drying humidity block or powder raw material in the fields   such   as    pharmaceutical,foodstuff,feedstuff,chemical industries and so on;

C.The raw material islarge in granule and small in bolck and having adhesive  property;

D.Suitable for raw materials,its volume will be changed when dry, such   as   giantarum,polyacrylamide,etc.

Specification

TECHNICAL PARAMETERS

MODEL	SIZE  --   -A	B	C	D	E	F	WEIGHT(KG)
ZLG-3×0.30	3000	300	1350	900	430	1650	1250
ZLG-4.5×0.30	4500	300	1350	900	430	1650	1560
ZLG-4.5×0.45	4500	450	1350	950	430	1700	1670
ZLG-4.5×0.60	4500	600	1550	950	430	1700	1910
ZLG-6×0.45	6000	450	1650	950	430	1700	2100
ZLG-6×0.60	6000	600	1700	1000	500	1700	2410
ZLG-6×0.75	6000	750	1850	1000	600	1850	2340
ZLG-6×0.9	6000	900	2000	1000	600	1850	3160
ZLG-7.5×0.6	7500	600	2100	1000	600	1850	3200
ZLG-7.5×0.75	7500	750	2000	1000	600	1850	3600
ZLG-7.5×0.9	7500	900	2100	1000	600	1850	4140

SPEC	unit	DW-1.2-8	DW-1.2-10	DW-1.6-8	DW-1.6-10	DW-2-8	DW-2-10
unit number		4	6	4	6	4	6
belt width	m	1.2	1.2	1.6	1.6	2	2
drying section length	m	8	10	8	10	8	10
thickness of he material	mm	10-80
temperature	℃	60-130
steam pressure	Mpa	0.2-0.8
steam consunption	kg/h	150-300	150-375	150-375	170-740	170-740	225-600
drying time	h	0.2-1.2	0.25-1.5	0.2-1.2	0.25-1.5	0.2-1.2	0.25-1.5
drying strength	kg	60-160	80-220	75-220	95-250	100-260	120-300
total power of the blower	kw	9.9	12.1	9.9	12.1	18.2	22.2
total  power of the equipment	kw	11.4	13.6	11.4	13.6	19.7	23.7
weight	kg	4800*3	5780*3	5400*3	6550*3	6350*3	7800*3

After Sales Service

Standard Warranty: 12 months or 2,000 operating hours (whichever comes first).
Extended Warranty: Optional coverage up to 36 months.
Global Support: 24/7 technical assistance and spare parts supply.
Training: On-site or remote operation/maintenance training.

Company Profile

Changzhou Aibuna Machinery Co., Ltd.

is   a   manufacturer   of   drying   equipment, pharmaceutical   equipment,environmental   protection   equipment,new   energy   equipment,food machinery,crusher,mixer,granulator,ordinary      machinery,mechanical      parts       manufacturing, processing   and   sales;drying   equipment   engineering,environmental   protection   equipment engineering  design,construction.(legally  approved  projects  can  be  launched  after  approval by the  relevant  departments). The  company  can  design  and  manufacture  drying  equipment  according  to  the  different characteristics  of  materials  and  the  requirements  of  users.In  order  to  satisfy  the  drying  of various  industries  and  materials,the  company  also  has  various  drying  test  benches,which provide  free   material  testing  for   users,listen  to  the  suggestions   of  owners,and   help   users choose the  best  design  more  perfect  and  reasonable  drying.Dryness  technology. The   company    in   line   with    the   "quality    first,reputation   first"business    purpose,formed   a complete   set    of    quality   management   system,developed    advanced,energy-saving,perfect, reliable design and perfect after-sales service in customers widely praised.

Why Choose Us?

OEM/ODM capabilities
Competitive pricing & bulk discounts
Fast shipping & customs clearance support
Turnkey project solutions

FAQ

Q: What's the lead time for orders?
A: Standard models ship in 15–30 days; customized units require 30–45 days.
Q: Do you provide after-sales service overseas?
A: Yes, we have partnered service centers in key regions.
Q: Can I request a customized bucket size?
A: Absolutely! We offer tailored attachments.
Q: What documents do you provide for export?
A: Full export package (Commercial Invoice, Packing List, Bill of Lading, COC, etc.).
Q: How do I place an order?
A: Contact us via email/phone for a quote, then confirm with a PO.